The 22nd Canton Fair was held in Guangzhou on October 15, 2017. Our company actively participated in the exhibition, showing the company's brand and image well, and received unanimous praise from customers at home and abroad.

Liaocheng Shenhui Laser Equipment Co.,Ltd.in 2017 to attend the Canton fair on October 15 to 19, for this exhibition, our company made full preparation, prepare a few highly welcome machine.

In 2017 the 121th China import and export commodities fair (Canton fair),had been on April 15, 2017-19 (5 days), China import and export commodities fair in guangzhou held a grand pa state exhibition center, and a happy ending.liaocheng shenhui laser equipment co., LTD.

The 121st China Import and Export Fair (Canton Fair) in 2017 was held in Guangzhou·China Import and Export Commodity Fair Zhangzhou Exhibition Hall from April 15th to 19th, 2017 (5 days). . Our company Liaocheng Shenhua Laser Equipment Co., Ltd. The booth number of this exhibition is 1.1 Hall J17-J18. There are a large number of customers visiting our booth, asking about machine model information, watching the machine work process, we are professional quality and Focused attitude and won a lot of orders.

Laser engraving machine maintenance guideline 1. Linear guide rails are filled with lubricating oil. The laser engraving machine uses a period of time, engraving, cutting and generating smoke, and dust has a corrosive effect on the guide rails, so the rails should be regularly maintained. Turn off the laser engraving machine, clean the rails with a clean soft cloth, and then apply grease to the rails. After the oil is finished, let the sliders roll back and forth on the rails to ensure that the lubricant enters the inside of the slider. After the oil is finished, let the slider roll back and forth on the guide rail. At this time, the guide rail must be installed first. Be careful not to fix the rail when installing the guide rail. Install the fixing nails all the way, keep the level, and fix the belt and the slider. Then install the lens and dim the X to go to the way. Second, the mirror | focusing mirror wiping laser engraving machine | laser cutting machine after a period of use, smoke dust will adhere to the surface of the lens, affecting the depth of engraving, cutting, will also affect the precision of engraving and cutting. Usually around a week (