What are the main points of failure of laser engraving machines?

The laser engraving machine is a new type of laser data processing equipment, mainly used for crafts, furniture, glass products, wood products, advertising, decoration and many other fields. Although it is widely used, there are still many people who do not know how to properly use and maintain the laser engraving machine, which can make the laser engraving machine malfunctioning situation. This article will combine the characteristics of the laser engraving machine, a simple analysis of the failure situation.

·The common types of laser engraving machine failures.

·How to maintain a laser engraving machine?

·Are there disadvantages to laser engraving machines?

The common types of laser engraving machine failures.

·Damage

After a certain amount of time out of use, the laser tube is prone to breakage and may even experience a drop in power, the cold water head of the tube falling off and a much shorter life. This can lead to the equipment not working, resulting in constant tube replacement. Such a situation occurs because the cooling system to ground, the way to solve such a fault is to often clean the water tank and the water circuit, refrigeration temperature control tank temperature control point to be reasonable, or cause

·blockage

A lot of smoke and dust can not be discharged, serious and rapid pollution of the lens and laser tube, so that the mechanical and electronic components are easy to oxidation caused by bad contact. The solution to this situation is to regularly check and clean the air-absorbing device and clean the fan duct.

In addition to the above-mentioned failures, laser engraving machines may also fail because of the mode of operation, the working environment, the use of time and other factors. Therefore, we need regular maintenance of the laser engraving machine. Wind laser engraving machine for a long time, will make the fan inside the accumulation of a lot of solid dust, so that the fan produces a lot of noise, but also not conducive to exhaust and deodorization. When the fan suction power is not enough to exhaust smoke, first turn off the power supply, the fan on the inlet and outlet ducts removed, remove the dust inside.

How to maintain a laser engraving machine?

First of all, the laser engraving machine can not be too harsh working phantom, dusty as well as extreme temperature environment to be excluded. Secondly, the water protection of the laser engraving machine should be frequently checked and cleaned, the cooling water often can not flush open the water protection float switch or water protection float switch does not reset, can not use the short connection method to solve the urgent need to avoid affecting the efficiency of the laser engraving machine.

Are there disadvantages to laser engraving machines?

The laser engraving machine is highly efficient and innovative in design, but it also has some disadvantages. For example, laser cutting is limited by the power of the laser and the size of the equipment, laser cutting can only cut plates and tubes of medium and small thickness, and as the thickness of the workpiece increases, the cutting speed decreases significantly. In addition to this, laser cutting equipment is costly and requires a large one-off investment.

With the above introduction, do you have an understanding of laser engraving machine? As a professional large laser cutting machine manufacturer, our company is a new high-tech modern enterprise, we pursue the quality of each laser engraving machine, each laser engraving machine has gone through a strict process. If you need to buy a laser engraving machine, please contact us in time, we will provide you with the best quality service.