Acrylic is easily cut and sculpted and comes in a variety of shapes and sizes. Characteristics and advantages of acrylic sheet: high transparency, 92% light transmittance, good reputation as "plastic crystal", excellent weather resistance, especially for outdoor use, ranking first among other plastics, and having good surface Hardness and gloss, great processing plasticity, can be made into a variety of shapes and products required.
The traditional machining method has a high mechanical failure rate, the metal cutter is extremely easy to be damaged or blunt, and the cut is rough, which can not achieve the desired effect. With a laser engraving machine, the laser cutting head will not contact the surface of the material. Not affected by the shape of the workpiece, laser processing has good flexibility and can process arbitrary graphics. The engraving and cutting speed is fast, high efficiency, good precision, environmental protection and pollution-free, save time and labor, and save costs. Acrylic characters are often used in the production of signage systems such as eyebrows on display cases in specialty stores, company logo walls, signage advertisements, and store signage.
Under normal circumstances, plexiglass is carved back, that is, carved from the front and viewed from the back, which makes the finished product more three-dimensional. In back carving, the graphics should be mirrored first, and the carving speed should be fast and the power should be low. If the power is too high during engraving, uneven stripes will appear on the bottom surface. If you want to sculpt deeper, you can try to carve several times. Plexiglass is relatively easy to cut. If the customer's requirements are not high, it can be delivered after cutting without flame polishing. Otherwise, an air blowing device should be used when cutting to improve the quality of the incision. When cutting more than 8mm of plexiglass, the lens of large size should be replaced.
