Laser equipment also has a big "examination"

This year's "examination" is really so many and difficult! The first is the prevention and control of the coronavirus, and then the resumption of work and production, ensuring people's livelihood and employment... Fortunately, we have overcome various difficulties and obstacles in unity and handed in satisfactory answers.

People have exams, and laser equipment also has "exams." There are mainly two examinations for laser equipment, one in the hot summer and one in the cold winter. Today, Teyu Electromechanical is here to share with you what "questions" are required for laser equipment in the hot summer and how to prepare for the exam.

High temperature is one of the must-test questions for laser equipment in summer (in some places it is also necessary to test "high humidity" at the same time).

Continuous online high temperature weather makes the temperature in the production workshop easily exceed 40℃. If this "question" is not done well, condensation water will easily appear inside the laser, causing damage to internal electrical components or modules.

So, how do you prepare for the exam? Teyu Electromechanical recommends starting from the following three points.

1. Build an air-conditioned room for laser equipment

The summer is very hot and humid. It is recommended to configure an air-conditioned room for the laser and set the temperature between 22°C and 26°C. After get off work every day, the air conditioner should be kept on and the dehumidification function should be set.

2. Maintenance of the electric cabinet

High-temperature operation can easily cause failures of electrical components. Therefore, it is necessary to maintain the electrical cabinet in time in summer.

1. Do regular maintenance of the electric cabinet air conditioner on the side of the electric cabinet, and pay attention to cleaning the condensate water collection box and dust net dust.

2. The heat dissipation filter components of the electric cabinet need to be cleaned regularly from the filter cotton dust. When cleaning, use a flat-blade screwdriver to disassemble the outer layer and take out the filter cotton for cleaning.

Three, configure a professional laser chiller

Professional laser chillers can provide stable cooling for the laser to ensure timely and effective heat dissipation, thereby ensuring the quality of the laser beam. For example, the special domain CWFL series dual-temperature chillers have a dual-circulation cooling system that can provide two channels of cooling water. Separately cool the fiber laser and laser head to effectively avoid the generation of condensed water.

Warm reminder: The chiller equipment should also be prepared for examination: do not block the air inlet and outlet of the chiller; clean up the dust regularly to avoid affecting the cooling effect. Finally, Teyu Electromechanical wishes you to pass the "examination"!