How to avoid laser engraving machine breakdowns?

Laser cutting into is the laser from the laser lift air, through the optical circuit system, to explore into a high power density laser beam. Laser engraving machine is the use of laser cutting equipment, it is a modern high-tech equipment. But any equipment will fail if not operated properly, and laser engraving machines are no exception.

How to use laser engraving machine effectively?

·Checking the focusing lens and reflector

Departmental equipment works hot for a period of time, focusing lenses and reflectors are typical representatives. Lens surface discolouration and rust; decolourisation and cracking are among the objects to be replaced, especially as many customers use large air pumps and air compressors, so that water quickly accumulates on the focusing lens, so the lens optical path system must be checked on time for cleanliness and good or bad quality.

·Regular maintenance

The machine should be cleaned thoroughly every week, the horizontal and vertical guideways, the drive cutting machines and rack should be cleaned and lubricated.

·Pay attention to the applicable environment

The working environment of the machine should not be too harsh, if the ambient temperature is too high or too low, or too much dust will lead to serious damage to the machine, the failure rate is increasing. Especially in humid environments the electrical components are prone to problems.

In addition to the above mentioned precautions, we also need to clean the machine tool and guide rail dirt to keep the bed clean, turn off the air source and power supply at the end of the day, and at the same time empty the remaining air in the machine tool pipe belt.

The related precautions for using a laser engraving machine.

Firstly, when using the autofocus, it is important to note that the autofocus bar must be tightened, otherwise the worktop will topple onto the laser. Secondly, it is forbidden to open the cover of the laser engraver when it is working. Avoid safety accidents. At the same time, when carrying out cutting processing, use the workpiece holder more than 2 cm from the workbench. Employees operating the laser engraving machine must have safety training and wear safety equipment.

The justifications for using a laser engraver.

·High quality

Our laser engraving machines are high end with imported software, easy to operate, safe and stable performance.

·Flexibility

Laser engravers can engrave on many materials, including metals, non-metals, metal-based and non-metal-based composites, leather, wood and fibres. It is worth noting that for different materials, laser engravers will show different laser cutting adaptations due to their own thermophysical properties and different absorption rates of the laser.

Through the above introduction, do you have an understanding of laser engraving machine? As a professional large laser cutting machine manufacturer, our company pursues the quality of each laser engraving machine, and each laser engraving machine has undergone a strict process. If you need to buy a laser engraving machine, please contact us promptly, our company is growing steadily and sustainably. We will provide you with the best quality service.